Порядок действий при работе с устройством — КиберПедия 

История создания датчика движения: Первый прибор для обнаружения движения был изобретен немецким физиком Генрихом Герцем...

Своеобразие русской архитектуры: Основной материал – дерево – быстрота постройки, но недолговечность и необходимость деления...

Порядок действий при работе с устройством

2019-10-25 127
Порядок действий при работе с устройством 0.00 из 5.00 0 оценок
Заказать работу

1. Прибор ZENWAVES выполнен в алюминиево-пластиковом корпусе с зеркальной вставкой на передней панели и имеет:

- два светодиодных индикатора (1) на передней панели

- кнопку выбора режима работы (2) на задней панели

- индикатор активности режима BL (3)на задней панели

- шнур питания (4) c USB разъемом для подключения к любому сетевому адаптеру напряжением 5 B

2. Подключите прибор к источнику питания, при этом включится 1-й режим работы.

3. Каждое нажатие кнопки выбора режима работы на задней панели прибора увеличивает номер режима работы прибора 1-2-3-4-5 и так по кругу.

4. При активации алгоритма «Белый-разноцветный» (режимы 1 и 2) светодиоды на передней панели в течение одной секунды светят белым цветом. Далее начинается процесс анализа.

5. При активации алгоритма «Радужный» (режимы 3 и 4) светодиоды на передней панели в течение двух секунд меняют цвет по всему цветовому кругу. Далее начинается процесс анализа.

6. При активации технологии BL (режимы 2, 4, и 5) загорается соответствующий индикатор на задней панели прибора.

7. В режиме 5, когда активна только технология BL, светодиоды на передней панели не горят, горит только соответствующий индикатор на задней панели.

8. Отключение прибора производится отсоединением от источника питания.

Указание по мерам безопасности

  1. Устройство выполнено в соответствии с требованиями к изделиям с внутренним источником питания.
  2. Не допускается прямое попадание воды в гнезда и разъем устройства.
  3. В случае обнаружения неполадок при работе устройства немедленно выключите его. Не пользуйтесь устройством с явно видимыми нарушениями его внешнего вида (сломанный корпус).
  4. Не размещайте устройство рядом с открытыми источниками огня.
  5. Не оставляйте устройство на долгое время под прямыми солнечными лучами.
  6. Храните устройство в недоступных для детей местах.
  7. Не используйте устройство в ванных комнатах и влажных помещениях.
  8. Применение устройства у детей разрешено только под наблюдением взрослых.
  9. Не размещайте аппарат внутри печей СВЧ.
  10. Не разделяйте аппарат на части.
  11. Не погружайте аппарат в воду.

Технические характеристики

Габаритные размеры не более 72 x 150 x 24 мм

Вес не более 290 г.

Параметры сигнала:

Напряженность электрической составляющей поля не более 10 В/м

Напряженность магнитной составляющей поля не более 0.1 А/м

Спектр - шум с гребенчатой структурой полосой до 10 кГц

Шаг гребенки - в 7.8 Гц

Максимум спектральной плотности в области 200 Гц

Напряжение питания 5 В

Ток потребления не более 300 мА

Гарантийные обязательства

1. Изготовитель гарантирует соответствие устройства при соблюдении условий хранения, транспортировки и эксплуатации.

2. Гарантийный срок эксплуатации - один год со дня приобретения.

3. При обнаружении механических неисправностей составных частей прибора, произошедших не по вине пользователя, возможна замена, как всего устройства, так и его составных частей, производится по усмотрению изготовителя.

4. Гарантия не распространяется на устройство со следами существенных механических и химических повреждений, нарушающих конструктивную целостность прибора.

5. Гарантийный срок эксплуатации исчисляется от даты приобретения устройства или даты получения почтовым отправлением.

6. По истечению гарантийного срока эксплуатации ремонт осуществляется по отдельному договору между потребителем и изготовителем.

Application


 

ZENWAVE device is a driven oscillator analyzer that is designed to influence the human body and mind, to actively manage the physical and emotional state and life-event processes.

There are two innovative technologies combined in the device - Bioland and Zenlight.
.

Bioland Technology (BL) is a miniature live copy of Earth's natural electromagnetic background. BL recreates the natural source of human biorhythms synchronization, drowned in the technogenic ‘electromagnetic smog’. It is used in residential and industrial buildings to eliminate the after effects of the harmful influence of artificial electromagnetic radiation, to synchronize the left and right hemispheres, to harmonize the hormone production and to restore biological rhythms of the human body.

Zenlight Technology (ZL) is a physical system based on the process of electron tunneling, with quantum effects and original way of processing the results of interaction of human mental structures with the space-time structures. ZL is a simulator-indicator, designed for the development of human capacities in the field of intention and mind-volitional influence on the running internal metabolic and psycho-emotional processes as well as an external life events line. 

BL and ZL technologies can be applied both separately and simultaneously.

 

Operating principle 



Bioland technology

The device’s microprocessor converts the stream of random events generated by the device at an average intensity of 10,000 events per second, into a noise signal with a comb spectrum in the range of 0 to 2 kHz with the pitch of 7.8 Hz, and with a peak at 200 Hz (average intensity of lightning discharges occurring every second on Earth). The frequency of 7.8 Hz is conditioned upon the propagation time of the electromagnetic signal, arising from the lightning discharge, around the Earth in a waveguide ‘Earth’s surface – ionosphere’, and the value range of 0-2 kHz is conditioned upon dispersion of electromagnetic signal of a singular lightning discharge on the propagation path. Further after the amplification, the converted stream is supplied to an oscillating circuit for the radiation in the surrounding space. In this way, the device generates the electromagnetic oscillations with its parameters which imitate the electromagnetic background which should be in the Earth’s surface without any technogenic factors.

BL technology creates a background that was proper to the Earth in those days, when mankind had not learned how to use electricity yet and had existed for millions of years. The human brain rhythms in the process of evolution synchronized with the rhythms of the background electromagnetic field of the Earth.

Studies have shown that the basic rhythm of the Earth serves as a reference signal to the brain, affecting the pineal gland, providing the regulation of endocrine functions biorhythms and metabolism. There is a clear correlation between the level of melatonin in the blood and the intensity of natural electromagnetic background of the Earth. Synchronization with the natural background of the Earth supports the most productive rhythms of the human brain, which correspond to the state of shallow meditation. Strengthening these rhythms leads to positive emotions, relaxation and comfort. Natural background of the Earth supports abstract thinking, helps to enter into a state of inspiration, and to expand consciousness.       

The electromagnetic field formed by the device within a radius of 10 meters provides energy-positive effect on the human immune system, reducing adverse effects of artificial electromagnetic fields.

Zenlight technology

Zenlight represents an analyzer of the random events stream. The stream of random events is generated based on the true and NIST certified (National Institute of Standards and Technology) analog random number generator (hardware white noise generator). Analysis of accidental event flow parameters is made on the virtual neurocomputer (VNC) ‘EMBRION’, implemented on the microprocessor of STM. In the process of operation of the virtual neurocomputer ‘EMBRION’ under the influence of the noise generator with a clock frequency of the processor, there arise and multiply virtual bifurcation points, distributed over the inner, virtual space and time, which have high sensitivity to external mental-volitional influences. The number of these bifurcation points is limited by length and depth of the VNC field.

Next, the processor measures the frequency of occurrence of each of the bifurcation points and compares them with a probability of occurrence of these points for a truly random process, according to the quantum mechanics and the field structure of VNC ‘EMBRION’. The result of the comparative analysis is displayed with multi-colored LEDs, defining the radiating color.

ZL technology is based on the achievements of the joint practical work of the Scientific Research Institute of energy-information biotechnologies (Nizhny Novgorod, ‘EMBRION’ project) and PSYGMA Group on the basis of the Moscow State University (Moscow, ‘Psychobutton’ project). During fifteen years, there has been carried out the scientific technological research and developments in the field of interaction between consciousness and the physical world, in particular, the ability of the human mind to influence the behavior of random, from the point of view of the physical laws, processes.

This work is based on the original theory of psycho-physical processes in the form of a mathematical model of ‘psyphysics’ developed by K.Plohotnikov. Within a framework of the model ‘psyphysics’ it was managed to formulate the concept psycho-computer and design of the elementary ‘yes-no’ switch or ‘Psychobutton’.

On the basis of VNC ‘Embrion’ there were developed several modifications of software and hardware implementations of ‘Psychobutton’ which register volitional mental human impacts on specially prepared electronic devices made by ZL technology.

For people who are interested in health, spirituality, meditation, or thinking mechanisms, researches in the field of human mental impact on the physical world and ZL technology give rise to new insights regarding the basic terms and ideas about the nature of consciousness and means to control both your health and vitally life-event processes.

In the ZL Technologies there are implemented two algorithms of work, ‘White – colorful’ and ‘Rainbow’. The main thing that distinguishes these algorithms is a mathematical device, based on which a microprocessor analyzes the behavior of bifurcation points generated by VNC ‘EMBRION’ from the stream of random events, and displays it in color combinations.

The device does not affect the level of the existing artificial electromagnetic fields and does not interfere with other electronic devices.


Поделиться с друзьями:

Индивидуальные и групповые автопоилки: для животных. Схемы и конструкции...

Индивидуальные очистные сооружения: К классу индивидуальных очистных сооружений относят сооружения, пропускная способность которых...

Своеобразие русской архитектуры: Основной материал – дерево – быстрота постройки, но недолговечность и необходимость деления...

Опора деревянной одностоечной и способы укрепление угловых опор: Опоры ВЛ - конструкции, предназначен­ные для поддерживания проводов на необходимой высоте над землей, водой...



© cyberpedia.su 2017-2024 - Не является автором материалов. Исключительное право сохранено за автором текста.
Если вы не хотите, чтобы данный материал был у нас на сайте, перейдите по ссылке: Нарушение авторских прав. Мы поможем в написании вашей работы!

0.015 с.